Rags 2 Riches - POR15 - Products

Home
POR-15
Product Info
How It Works
FAQ's
Show Schedule
ClearKote
Links
Contact Us
Catalog




Questions?
CALL TOLL FREE
1-800-231-2587

Sign Up for Helpful Tips and Seasonal Specials!
Email:  

POR15
Basket Contents    Check Out

  • POR-15
    Rust Preventive Coatings
  • Preparation Products
  • Fuel Tank Sealers
    & Fuel Stabilizers
  • Specials
  • Topcoats
  • Restoration Kits
  • Basic Supplies
  • Hi-Temp. Coatings
  • Tie-Coat Primers
  • Strippers & Solvents
  • Fillers & Puttys
  • Appearance Products
  • ClearKote Products


  • > Home > Online Catalog > Topcoats

    Glisten PC

     
    Glisten PC Quantity in Basket: none
     
    Sizes:
     
    Quantity:
     
    A Brilliant Two-Component Clear Coating, GLISTEN PC™ is a High Gloss, Rock Hard, Water-clear topcoat designed for spray or brush application over all metal surfaces, including highly polished aluminum and chrome surfaces, wood and fiberglass.
    Glisten PC Product Info
    Coat your brightwork (cleats, railings, spars, blocks, etc.) and faded gelcoat with Glisten PC, the toughest clear coat available anywhere!

    Use Glisten on:
    • Marine Railings
    • Brass
    • Copper
    • Aluminum
    • Chrome
    • Ornaments
    • Lights
    • Wood
    • Fiberglass
    Glisten will not yellow or fade, and it will resist salt, moisture and abrasion.

    Glisten PC will not leave brushmarks, and will dry in less than one hour, but will take 3-4 days to reach maximum hardness.

    When Glisten PC is first dry to the touch, it will appear to be very soft. Avoid touching it for several days until it becomes hard and tough. Accidental contact could damage the surface before full cure has taken place. Like many other POR-15 coatings, Glisten PC is MOISTURE-CURED, which means it is strengthened by exposure to moisture. It will never crack, chip, peel, or yellow, and is very flexible as well.

    Glisten Clear Coat
  • Pint covers @ 50 sq. ft.
  • Quart covers @ 96 sq. ft.
  • Gallon covers @ 400 sq. ft.

    Make sure you've got all the supplies you'll need for using POR-15 rust preventive coatings and read our FAQ and Product Information areas.
    Marine Clean

    Marine Clean
    For POR-15 coatings to work best surfaces must be free of grease. Marine Clean™ cleans and degreases in one application without leaving residues, noxious fumes or flammable solvents.
    AP-120 Metal Prep

    AP-120 Metal Prep
    AP-120 is a water based metal prep specifically designed for use with our famous clear coating called Glisten PC. AP120 should always be used when painting directly over aluminum and other reactive metals such as; brass and copper.
    PreVal Spray Gun

    PreVal Spray Gun
    The Preval Spray Gun is the perfect solution for applying POR-15 coatings to small areas where control and quality of finish are important.
    Paint Brushes

    Paint Brushes
    Our throw-away-priced brushes will hold more paint and spread more smoothly than more expensive brushes.
    Paint Spouts

    Paint Spouts
    Flexible Paint Spouts eliminate messy drips and keep grooves clean for resealing cans. Order enough for all your paint cans.
    Latex Gloves

    Latex Gloves
    Our Latex Gloves are thin, close-fitting, and have the dexterity and protection of fine surgical gloves. These are a must when using POR-15.
    POR-15 top coats are actually strengthened by exposure to moisture. They won't crack, chip, peel, or yellow, and are flexible as well.
  • Return to Top

    Home | POR-15 | Product Info | How It Works | FAQ's | Show Schedule
    ClearKote | Links | Contact Us | Free Catalog

    Call Toll Free: 1-800-231-2587

    Rags2Riches
    1091 Jim Adams Rd
    Greensboro, GA 30642
    info@rags2riches-por15.com
    ©Copyright 2007

    Developed by Wet Cement Design