|
Questions?
CALL TOLL FREE
1-800-231-2587 |
|
|
> Home > Online Catalog > Fillers & Puttys
Fire Seal 2000 | |
|  |
Quantity in Basket:
none
|
|
| | FIRE SEAL 2000™ is a single-component (no mixing
required) ceramic and stainless steel-filled putty that
is resistant to fuels, oils, and corrosives. After it is
fully cured, it will withstand temperatures up to
2000° F. |
For years we've been working on a product to repair cracks,
pits or holes in exhaust manifolds, tailpipes, mufflers, or
other components subjected to high temperatures while in use.
Because replacement parts are often difficult or impossible to
find, there is a real need for this type of product in the
marketplace.
GREAT for sealing seams before powder-coating, as Fire Seal
produces no out-gassing when heated.
FIRE SEAL 2000™ may be applied to rough-surfaced or sandblasted
steel, stainless steel, or cast iron. Use a putty knife,
small trowel or spatula to apply. Curing: Let FIRE SEAL 2000™
dry for 16-24 hours. Begin final cure by idling engine for
10-15 minutes at a time. You may sand FIRE SEAL 2000™ after
it is fully cured, using a file or medium grit sandpaper.
Do not use any lubricants for machining, but always use a
dust mask to avoid inhaling the sanding dust.
|
 |
 |
|
|
