Rags 2 Riches - POR15 - How It Works

Basket Contents

Check Out

Questions?
CALL TOLL FREE
866-888-2651
9 - 5 Mon.-Fri.

POR-15 restoration products are designed to work as a complete system.

When used together these products provide you with a coating that will not only stop rust, but will prevent it from returning.

To aid you in your particular rusty metal project, we have included the following steps to explain the various stages in rust prevention.

All POR-15 products are available individually or many are available in efficient, cost saving kits geared to your specific restoration need.


	Degrease and Clean surface Clean the rusty metal surface with MARINE=CLEAN™ degreaser/ cleaner. An environmentally safe cleaner, MARINE=CLEAN™ will remove dirt, grease, wax or other contaminants that could interfere with the restoration.

	Neutralize rust; Etch metal Prepare the rusty metal surface with METAL-READY™. As a rust remover, METAL-READY™ will neutralize rust, etch metal for better adhesion, and coat the metal with zinc phosphate to encourage deep chemical bonding of POR-15™ to the base metal and rust.

	Apply rust preventive coating to surface Seal the rusty metal with POR-15™ Rust Preventive Coating. As the moisture resistant POR-15™ bonds to the rusty metal, it will form an unbelievably tough, almost ceramic-like finish that will not crack, chip or peel.

	Topcoat the surface Topcoat the metal surface with CHASSICOAT BLACK™. The semi-gloss black CHASSICOAT BLACK™. provides the frame, chassis or underbody finish desired by most restorers as it protects the underlying POR-15™ from harmful UV light. This step is not always necessary, it really depends on the location of the application. Call 1 877 548-9323 for more details.

Below are the necessary steps to restore your cracked and rusted engine manifolds using POR-15 's Manifold Restoration Kit. Kits are available in 3 colors, Factory Manifold Gray, Black Velvet, and POR-20 Brilliant Aluminum. When restoring a set of engine manifold which are already in fairly good condition, applying one of the 3 High Temperature coatings may be all that is necessary.

Fire Seal 2000